HOW TO PROPERLY USE A TIRE PRESSURE GAUGE
Just received your new Rhino Tire Pressure Gauge? This article will teach you how to properly use it for best results!
Do Not over-inflate the maximum pressure on your tire pressure gauge. Doing so may cause damage to the gauge.
CHECKING TIRE PRESSURES:
- Tire pressures should be checked often. Severe weather and temperature swings will cause tire pressures to fluctuate in all tires.
- Tires not inflated to the proper pressure can blow out, wear out faster and reduce fuel mileage.
- It is advisable to never over inflate or under inflate your tires.
- It is highly recommended to check pressures when the tires are cold.
- Tire pressure is measured in pounds per square inch, or PSI. You can often find the right PSI for your vehicle on a sticker inside the driver’s side door jam, in the owner’s manual, or available from the tire provider.
TIRE PRESSURE GAUGE OPERATING INSTRUCTIONS:
- Firmly press your Angle chuck and or Ball chuck on your valve stem to create a tight airless seal.
- While the chuck is firmly pressed on your valve stem take your reading from the gauge head.
- If you hear any hissing, air is escaping from the tire and you will need to press harder or check the valve stem for damage.
- To release air from your tire simply push the valve button located just below the gauge head.
- Continue until desired pressure is obtained.
Here at Rhino USA, we're proud to be a family owned and operated business located in Temecula, California. However, we're not just "any" small family business, we are a Father and 2 Sons who are avid motorcycle and powersports enthusiasts. We designed and thoroughly field tested all of our products to make sure they are the best! Get your new Tire Pressure Gauge now!